Specifications Issue/Rev. 0.3 (7/10) Bulletin SS06045 Electronic Preset Delivery System Smith Meter® microLoad.net The Most Trusted Name In Measurement. Ramanichandran Novels. Electronic Preset Delivery System Smith Meter microLoad.net Operations Manual Bulletin MN06149 Issue/Rev. 0.0 (9/04) The Most Trusted Name in.
Smith MeterTM AccuLoad III - Measurement Issue/Rev. 0.0 (6/03) Side-Stream Blending When using Revision 10.00 firmware or better, the AccuLoad III has the capacity to handle side-stream blending. Greyscale Gorilla Texture Kit Pro 3.0.
Side-stream blending is two-product ratio blending where the minor of two products is metered and controlled by a valve, while the main product is free flowing. Another meter and its corresponding control valve are located downstream of where the two products merge.
If side-stream blending is selected on a load arm, Meter 1 is the meter measuring the mingled products, or the batch/recipe. Meter 2 is the meter measuring the minor product.
Product 1 is the major, free flowing, stock product, and Product 2 is the minor stock product. Only one temperature, density, and pressure input is associated with the arm. Meter 1 and Meter 2 share this data for display and volume correction.
Meter 1 may measure a variety of blends containing Product 1 and Product 2; however, only one meter factor curve may be programmed for Meter 1. The AccuLoad does not support a different meter factor curve for each blend. Omnic Software. Blend Delivery Delivery is similar to that of a normal ratio blender, but certain changes must be made to accommodate side-stream plumbing. For side-stream blending, the batch data (volume representing the blend) is obtained from Meter 1 directly rather than being a sum of Meter 1 and Meter 2. Recipes allow product percentages ranging from 0 to 100% for Product 1 and 0 to 100% for Product 2; however, the AccuLoad will consider a recipe programmed for 100% of Product 2 to be a special situation (Meter 2 proving).