Deuce Luggage Rack Installation Average ratng: 3,5/5 5470reviews
Deuce Luggage Rack Installation

Harley Davidson FXSTD FXSTDI Softail Deuce Saddle bags backrest Sissybar luggage rack carriers luggage panniers rack Held Renegade, Magnum Cobra HAC Fehling Magnum. Driver Lenovo Z460 Win7 more. Softail deuce backrest mounting hardware Direct. INSTALLATION 1. This box requires the presence of a mounting plate secured to the motorcycle’s luggage rack.

INSTALLATION 1. Remove seat according to the instructions in the service manual. Remove the ECM caddy/battery cover by removing two screws. See Figure 1 and Figure 2 for the mounting locations of the brackets.

NOTE Some seats may limit the fore/aft mounting location of the backrest bracket. See Figure 3 and Table 1. Remove plastic protective cap and locknut from stud. Leave the small plastic washer in place or the stud plate will fall out. With the backrest mounting bracket tab facing forward, attach the backrest mounting bracket (1) to stud plate with stock locknuts from the stud plate. Tighten locknuts to 5-8 ft-lbs (6.8-10.8 Nm). Attach the front mounting bracket (6) to the frame cross- member using using two flange screws (8) and flange nuts (7).

Tighten screws to 72 in-lbs (8.1 Nm). Attach the bracket support (2) to the front mounting bracket (6) with screw (8) and nut (7). Install screw (5) and nut (9) to bracket support and backrest tab and tighten to 15 ft-lbs (20.3 Nm). 1 2 is05475 1.

Backrest mounting bracket 2. Front mounting bracket Figure 1.

Bracket Mounting Locations 3 2 1 is05476 1. Backrest mounting bracket 2. Front mounting bracket 3. Bracket support Figure 2. Backrest mounted After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury.

(00070b) -J04733 1 of 2 9. Install the ECM caddy/battery cover using two screws previously removed and tighten to 6-8 ft-lbs (8.1-10.8 Nm). Install seat according to service manual instructions. Hold slit between rider and passenger seat open. On rider backrest, compress backrest rods and spring. Java Reflection In Action Pdf. Insert rods into backrest mounting bracket.